For Authors

MAIT JOURNAL OF SCIENCE AND TECHNOLOGY

AUTHOR GUIDELINES

ISSN: xxxx- xxxx (Print) | ISSN: 3139-5414 (Online)

The MAIT Journal of Science and Technology publishes original, high-quality scholarly work in science, engineering, technology, computing, and interdisciplinary research. Authors are required to ensure that submitted manuscripts meet the journal's standards of originality, scientific rigor, ethical conduct, and professional presentation.

1. MANUSCRIPT CATEGORIES

The journal considers the following categories:

  • Original Research Articles: Novel theoretical, experimental, computational, or applied research.
  • Review Articles: Critical and comprehensive analyses of existing literature and emerging research directions.
  • Survey Articles: Structured comparisons, classifications, and evaluations of existing approaches.
  • Technical / Methodological Papers: Novel algorithms, models, frameworks, systems, methodologies, or technical solutions.
  • Case Studies / Application Papers: Practical implementation and evaluation of scientific or technological solutions.

 

2. MANUSCRIPT PREPARATION

 Manuscripts should comply with the following requirements:

  • A4 page size with 25 mm margins, unless otherwise specified in the journal template.
  • Recommended length: 8–15 pages, including references, figures, and tables.
  • Manuscript text should be written in clear, professional English.
  • The manuscript should follow the official journal template.
  • The title should be concise, informative, and representative of the research.
  • Author names, affiliations, country, and corresponding-author email must be provided.
  • Abstract: 150–200 words.
  • Maximum five keywords.
  • Figures and tables must be numbered, captioned, cited in the text, and of suitable publication quality.
  • Equations should be prepared using a standard equation editor.
  • SI units and standard scientific terminology should be used consistently.
  • Acronyms must be defined at first use.

 

3. ORIGINALITY AND PLAGIARISM

All manuscripts must represent original work and must not have been published or submitted simultaneously elsewhere.

The journal normally requires an overall similarity level of 15% or below. However, similarity is assessed qualitatively as well as quantitatively. Excessive similarity with a single source, direct copying, close paraphrasing, self-plagiarism, or modification of text solely to evade similarity detection is unacceptable.

Authors are responsible for properly citing all ideas, text, data, figures, tables, software, and other material obtained from external sources.

 

4. CITATION AND REFERENCES

The journal requires authors to use IEEE referencing style, unless otherwise specified by the journal.

Authors must:

  • Cite relevant and original sources.
  • Ensure that every in-text citation appears in the reference list.
  • Ensure that every listed reference is cited in the manuscript.
  • Verify author names, titles, publication details, page numbers, year, and DOI where available.
  • Avoid irrelevant or excessive citations.

Self-Citation

Self-citation is permitted only when the author's previous work is directly relevant to the current manuscript. Unnecessary or excessive self-citation, citation manipulation, or inclusion of references solely to increase citation counts is prohibited.

 

5. ACKNOWLEDGMENT, COPYRIGHT AND PERMISSIONS

Any external work, material, dataset, software, figure, table, questionnaire, image, or methodology used, adapted, or reproduced in the manuscript must be appropriately cited and acknowledged.

Where required, authors must obtain the necessary copyright permission, institutional approval, or No Objection Certificate (NOC) before publication.

Authors should acknowledge funding agencies, institutions, laboratories, technical assistance, and other relevant support.

 

6. PUBLICATION ETHICS

The journal follows recognized principles of responsible scholarly publishing. Authors must maintain the highest standards of research integrity.

The following practices are prohibited:

  • Plagiarism and self-plagiarism.
  • Fabrication or falsification of data.
  • Manipulation or misleading presentation of results.
  • Duplicate or redundant publication.
  • Simultaneous submission to multiple journals.
  • Gift, honorary, or inappropriate authorship.
  • Citation manipulation.
  • Misrepresentation of sources or research findings.

Where research involves human participants, personal data, surveys, interviews, or other ethically sensitive material, appropriate ethical approval and informed consent must be obtained where applicable.

 

7. AUTHORSHIP

Authorship should be limited to individuals who have made substantial intellectual contributions to the research.

All authors must:

  • Approve the final manuscript.
  • Agree to the author order.
  • Accept responsibility for their contributions.
  • Disclose relevant conflicts of interest.

The corresponding author is responsible for communication with the journal and coordinating responses among all co-authors.

 

8. ARTIFICIAL INTELLIGENCE (AI) POLICY

The journal permits responsible use of AI-assisted tools for activities such as language improvement, grammar correction, coding assistance, or other legitimate research-support activities.

However:

  • AI tools cannot be listed as authors.
  • Authors remain fully responsible for the manuscript.
  • AI-generated content must be carefully reviewed and verified.
  • AI must not be used to fabricate data, results, references, images, or scientific evidence.
  • Any substantial use of AI in manuscript preparation or research must be transparently disclosed. 

Recommended AI Disclosure

AI Disclosure: The authors used [AI tool name] for [purpose]. All AI-assisted content was reviewed and verified by the authors, who remain fully responsible for the accuracy, originality, and scientific integrity of the manuscript.

 

9. LANGUAGE AND QUALITY REQUIREMENTS 

Manuscripts must be written in clear, concise, and professional academic English.

Authors should avoid:

  • Unnecessary jargon.
  • Excessive repetition.
  • Unsupported claims.
  • Ambiguous or vague statements.
  • Unnaturally complex sentences.
  • Machine-translated or poorly edited language.
  • Tortured phrases or artificial wording used to circumvent plagiarism or AI-detection systems.

Technical terminology should follow established usage in the relevant field.

 

10. DATA AND RESEARCH TRANSPARENCY

Authors should provide sufficient methodological information to allow readers and reviewers to understand and, where reasonably possible, reproduce the research.

Where applicable, authors should disclose:

  • Data sources.
  • Research instruments.
  • Experimental parameters.
  • Software and algorithms.
  • Evaluation metrics.
  • Data or software availability.

Research data and results must not be fabricated, selectively manipulated, or knowingly misrepresented.

 

11. CONFLICT OF INTEREST

Authors must disclose any financial, professional, institutional, or personal interests that could influence the research.

If no conflict exists, the following statement may be used:

Conflict of Interest: The authors declare that they have no conflict of interest.

 

12. FUNDING

All financial support, grants, sponsored projects, or institutional funding associated with the research should be disclosed, including the grant or project number where applicable.

 

13. PEER REVIEW POLICY

All submitted manuscripts are subject to an initial editorial assessment to determine their suitability, originality, technical quality, ethical compliance, and conformity with journal requirements.

Manuscripts that pass the initial screening may be sent for peer review by independent reviewers with relevant expertise.

The review process may consider:

  • Originality and novelty.
  • Scientific and technical quality.
  • Methodological rigor.
  • Validity of results.
  • Quality of discussion.
  • Relevance of references.
  • Clarity and presentation.
  • Ethical compliance.

Authors may be required to revise manuscripts in response to reviewer and editorial comments.

The final decision regarding acceptance, revision, or rejection rests with the Editorial Board.

 

14. EDITORIAL INTEGRITY

The Editorial Board reserves the right to:

  • Reject manuscripts that do not meet the journal's standards.
  • Request clarification or supporting documentation.
  • Request evidence of ethical approval or permissions.
  • Conduct additional similarity or integrity checks.
  • Withdraw or correct published material where serious ethical or factual concerns are subsequently identified.

 

15. SUBMISSION CHECKLIST

Before submission, authors should confirm that:

☐ The manuscript follows the official journal template.

☐ The manuscript is original and is not under consideration elsewhere.

☐ The manuscript is within the prescribed page limit.

☐ Similarity has been checked and is normally 15% or below.

☐ There is no unacceptable similarity with any individual source.

☐ All authors have approved the manuscript and author order.

☐ All figures and tables are properly numbered, captioned, and cited.

☐ References are accurate, relevant, and formatted according to IEEE style.

☐ Self-citations are limited to genuinely relevant publications.

☐ All borrowed or adapted material has been properly cited and acknowledged.

☐ Required copyright permissions, approvals, and NOCs have been obtained.

☐ Ethical approval and informed consent have been obtained where applicable.

☐ Funding and conflict-of-interest information has been disclosed.

☐ Applicable AI tool used has been transparently disclosed.

☐ The manuscript has been thoroughly checked for language, grammar, formatting, and technical consistency.

 

16. AUTHOR DECLARATION

By submitting a manuscript to the MAIT Journal of Science and Technology, the authors confirm that the work is original, has not been published previously in substantially the same form, and is not simultaneously under consideration elsewhere.

The authors confirm that all sources and third-party materials have been appropriately cited and acknowledged, all necessary permissions and approvals have been obtained, and all applicable ethical and AI-disclosure requirements have been satisfied.

The authors accept full responsibility for the accuracy, originality, ethical integrity, and scientific content of the submitted manuscript.

Template For Manuscript Prepration

Download Template

Journal Information

ISSN (Online) 3139-5414
Frequency Yearly
Starting Year 2024
Subject Engineering & Technology
Language English
Format Online
Publishing Model Open Access & Subscription

Editor & Publisher

Editor-in-Chief :   Prof. Dr. Vikram Bali 
Director, MAIT, Sector-22 Rohini, Delhi 110086 , India
director@mait.ac.in

Publisher :  Maharaja Agrasen Institute of Technology (MAIT),  PSP Area, Plot No. 1, Sector-22 Rohini, Delhi-110086, India

Web :  journal.mait.ac.in/engg
Email :  editor.tech@mait.ac.in
Contact :  editor.tech@mait.ac.in

About Journal

A distinguished scholarly platform dedicated to publishing high-quality research on advanced technologies shaping the future of engineering and business landscapes.

OPEN ACCESS
MAIT LOGO